I just received the bitaxe gamma node. I did set up the bitaxe and is working fine. I'm still waiting for the nodes raspberry pi 5 to sync to 100% to the Bitcoin block it takes more than 24 hours but so far everything is working great.
Everything PowerMining, advertisers the product performs 100%
I am a total newbie when it comes to anything dealing with Bitcoin or mining. This is my first miner and it was fairly easy to setup the node and get it synced with the blockchain. The only issue I had was with setting up the Bitaxe Gamma was the settings to point to the mining pool. I don't understand how that whole process works and after watching quite a few videos on youtube i finally got it to mine to the node using umbrel.local.
I ordered 4x NerdOctaxes from power mining, they shipped super quick via FedEx and got here from Latvia (I'm in the USA) within 3-4 days. These NerdOctaxes seem to be of great build quality, only thing I did was tighter a few screws on the frame that were loose (probably from vibrations during shipping and handling). The firmware updates and emails from the company on how to do them have been great. You can tell they really care, and are passionate about the product line they offer. Definitely recommend doing business with Power Mining IO. Also, at the time of the order I received a discount via a VoskCoin promotion code.
Quiet, powerful, easy to setup. Every Bitcoiner should consider it and connect it to their own Datum Server for true decentralization.
First mining rig. All works well except for the fan attachment. The fan does not attach securely to the heat sync. There are four screws, but nothing to secure the screws into. I placed fan careful over the heat sync to provide cooling without falling off. I thought maybe the screws weren't long enough to reach onto board, but I don't see a place on board or heat sync to attach to. Other than that, rig has been working great averaging over 1.1 T/h!
Quality products, fast shipping, full customer support. I love my Nerd miner, I'll be back!
Great Bitaxe unit. Very customizable, I got a hashrate of 1.27 Th/s, ASIC temp at 54C, volt/reg temp at 49C, efficiency at 13.5 J/Th, power consumption of 17.1w and the fan runs an average of 50%. I did ad one heat-sink to the front and two to the back of unit. The above is from setting the Freq at 625 MHz and the Core Voltage at 1100 mv. I would highly recommend Power Mining, Thank you Power Mining
Just got into this btc mining stuff 11/15/2025. This is my 2nd BitAxe purchased just weeks after starting the my 1st solo miner.
This Gamma configuration is awesome. IMO, extremely quiet little rig, well compared to my very noisy Supra, this seems truly silent.
Now looking forward to seeing PowerMining's release of the Turbo, for my 3rd btc rig!
Thank you for developing such an innovative product. Both the Raspberry Pi and the mining machine are operating normally, and there are no issues with the product itself.
The problem we experienced was caused by internet packet congestion. It seems that the amount of traffic exceeded the performance limits of our router, which led to a temporary loss of connection. This issue was resolved by replacing the router, so it was not a product-related problem, although it was something we could not have anticipated before using it.
Overall, I am very satisfied with the product.
This is awesome, and a great conversation piece. So far, works great and does everything it claims. A few upgrades and it is able to average 1.4(fan/heatsink). Great quality control also, will be buying from power mining again! Keep up the great work!
Easy to install. Nice quality!
Vandaag binnen gekregen met expres post duurde werkelijk 1 werkdag super !! Instellen was een eitje ongelooflijk blij met de mijner volgende keer weer hier bestellen top kwaliteit ⛏️💪🏻😁
Nice to be a part of the future ✊🏽
Miner was easy to set-up and start mining the node not so much still working on that. been too busy to reach out for help.
Well received in Singapore, great quality product
Really enjoying my new NERDQAXE++!!! It took a while to get to me in the US, but it was worth the wait. Im learning so much about these asic boards and other esp32 boards. I cant wait to start building my own node! these devices has opened a new world for me! I got a new fan and I installed today it felt great!
side note: for both my power mining miners
BD: NERDQAXE++ 1.06G!!
BD: BitAxeGamma601 8.73G!!
THANK YOU ALEX AND THE DISCORD FOR ALL YOUR HELP!!!
I would gladly buy another one in the future!!!
- JFK
It’s my first miner and node. un learning the process of setting it up even though I’m paying .24 a kWh I’m looking to purchase mor more mining rigs such as the Cannan Avalon q @90 TH and the Avalon heater @ 37.5TH .
